思科瘦AP轉胖AP AIR-LAP1131AG-C-K9配置基礎教程(3/3)
extracting c1130-k9w7-mx.124-10b.JDA3/7101.img (131328 bytes)............................
extracting c1130-k9w7-mx.124-10b.JDA3/6701.img (131328 bytes)............................
extracting c1130-k9w7-mx.124-10b.JDA3/info (283 bytes)
extracting info.ver (283 bytes)
Deleting current version...
Deleting flash:/c1130-rcvk9w8-mx...done.
New software image installed in flash:/c1130-k9w7-mx.124-10b.JDA3
Configuring system to use new image...done.
Requested system reload in progress...download took about 317 seconds
Loading "flash:/c1130-k9w7-mx.124-10b.JDA3/c1130-k9w7-mx.124-10b.JDA3"...##########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
File "flash:/c1130-k9w7-mx.124-10b.JDA3/c1130-k9w7-mx.124-10b.JDA3" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sun 07-Jun-09 02:59 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x0086A6E0
Initializing flashfs...
flashfs[1]: 170 files, 13 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 10827264
flashfs[1]: Bytes available: 5171712
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Radio 1 A506 7100 E8000000 A0000000 80000000 3
Radio 1 A506 6700 E8000100 A0040000 80010000 2
tx_paks 991
tx_paks 495
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco AIR-LAP1131AG-C-K9 (PowerPCElvis) processor (revision B0) with 24566K/8192K bytes of memory.
Processor board ID FCW1431V0JL
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: D0:D0:FD:BC:E1:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC142922S6
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCW1431V0JL
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-C-K9
Press RETURN to get started!
刷新完成之后,可以看到如下圖所示,已民經傳完的ios鏡像。

Show version時,可以看到ios已經改變。

這時,可以進入配置模式。
Enter configuration commands, one per line. End with CNTL/Z.
ap(config)#
ap(config)#interface bVI 1
ap(config-if)#ip address 10.41.0.81 255.255.255.0
ap(config-if)#no shutdown
ap#write
這時,可以在瀏覽器中,輸入10.41.0.81進入配置界面。
打開IE窗口 鍵入http://ap的管理地址
輸入用戶名:Cisco 密:Cisco

1、登錄到配置界面。左面的界面,home主頁

2、進入express setup快速安裝。設置AP名字

3、進入安全配置選項

4、點擊左側"security下ssid manager",右側ssid一欄中填入"自定義的名字",將"Radio0"和"Radio1",前面打上"對勾"。


5、拖動右側的活動條到下圖:點擊"apply"

6 應用后,在最下面一項中 "Radio0"和"Radio1"中,都選擇 single bssid, 在"set single guest mode ssid"一項中,在下拉菜單中選擇剛剛建立好的ssid。 點擊"apply"




點擊上圖的radious R0
7、檢查無線端口啟用狀態,點擊左側的"network interfaces"下的"Radio0"和"Radio1"檢查,這兩個無線端口是否啟用。

8、選擇最上側的"settings",確保選擇"enable"和"access point",如果選擇后,點擊下面的應用。


開啟第二個接入點時報錯,提示需要選擇一個data Rates




9、配置無線安全接入認證

點擊左側"security下的encryption Manager"分別配置"Radio0""Radio1"。兩個接口配置相同。
選擇"cipher"點擊下拉菜單,選擇"wep 40 bit" 選擇 encryption key 1: 密鑰 是 "字母a 到 f" "數字1 到 9"自由組合,長度必須是10位以上的,包含10位。 Key size 下拉菜單選擇"40 bit" 點擊"apply"

10、可以更改信道。

